Used for adhesion of orthodontic brackets when used along with an adhesive
PRODUCT BENEFITS
Single bottle with etch, prime & bond provide clinically acceptable bond
strength
The primer contains the revolutionary 10-MDP
(10-MDP) a functional monomer which helps in bonding to dentin, cut
and un-cut enamel.
MDP promotes physical and chemical adhesion
No post operative sensitivity
High bond strength and durability
Size 5ml Bottle
Instruction for use :
SELF-ETCHING TECHNIQUE : Wash thoroughly with water spray. Use an absorbent pellet or high volume evacuation (HVE) for 1-2 seconds, to remove excess water (do not dessicate).
Dispense 1-2 drops of Fusion Crysta Adhesive Primer into a clean well. Replace the cap onto the bottle promptly to avoid evaporation of solvent.
Apply two separate coats of Fusion Crysta Adhesive Primer, scrubbing the preparation with a microbrush for 10-15 seconds per coat.
Air-drying using an air syringe for at least 10 seconds till there should be no visible movement of the adhesive. The surface should have a uniform glossy appearance; otherwise, apply an additional coat of FUSION CRYSTA ADHESIVE PRIMER and repeat Step 2 and 3.
Light cure for 20 seconds.
Continue with placement of the orthodontic adhesive (FUSION CRYSTA ADHESIVE) restorative material according to the manufacturer’s instructions.
SELECTIVE-ETCHING TECHNIQUE : Wash thoroughly with water spray. Etch enamel using 37% phosphoric acid (ACTINO GEL) etchant for 15 seconds. Rinse thoroughly. Remove excess water by blotting the surface with an absorbent pellet or high volume evacuation (HVE) for 1-2 seconds, leaving the preparation visibly moist.
Dispense 1-2 drops of Fusion Crysta Adhesive Primer into a clean well. Replace the cap onto the bottle promptly to avoid evaporation of solvent.
Apply two separate coats of Fusion Crysta Adhesive Primer, scrubbing the preparation with a microbrush for 10-15 seconds per coat.
Evaporate excess solvent by thoroughly air-drying with an air syringe for at least 10 seconds, there should be no visible movement of the adhesive. The surface should have a uniform glossy appearance; otherwise, apply an additional coat of FUSION CRYSTA ADHESIVE PRIMER and repeat Step 2 and 3.
Light cure for 20 seconds.
Continue with placement of the orthodontic adhesive (FUSION CRYSTA ADHESIVE) restorative material according to the manufacturer’s instructions.
Storage conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stores in a cool dry place.
Shelf Life : 2-years from the date of manufacturing.
