After shaping and cleaning, root canal should be filled with NanoSeal-S in combination with gutta-percha.
After standard root canal preparation, the root canal should be thoroughly irrigated with sterile water to remove traces of irrigating agents which would interfere with the curing of NanoSeal-S.
The root canal should be thoroughly dried using alcohol/ paper points .
The sealer must be dispensed from the dual barrel syringe in a 1:1 ratio. The sealer must be mixed thoroughly to make a void free homogenous mix.
The root canal can be coated with NanoSeal-S using a gutta-percha point or a paste carrier.
NanoSeal-S has a working time of less than10 min and a setting time of 10-15 min.
Use of heated instruments can accelerate the setting of NanoSeal-S.
After use, the dual barrel syringe must be thoroughly cleaned using a tissue paper and properly sealed to avoid contamination. Removal of sealant during retreatment NanoSeal-S can be removed by conventional methods. The sealer does not chemically adhere to dentine. Use of heat, gates glidden drills and paeso-reamers are advocated for removal of gutta-percha during post space preparation and retreatment.
Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life is not affected after opening if stored in a cool dry place.
Shelf life : 3 years from the date of manufacturing.
